JAM Systems Q10 :: 4 x  2500W amplifier
COOKIES: Our website uses cookies in order to provide a better online experience, this is essential for use of the shopping basket, and to login to our website. We require your consent to use cookies in order to meet relevant regulations. Please CLICK HERE to indicate your consent and continue using our website. We do not use third party tracking cookies on our website, cookies are used for this site's functionality only.
JAM Systems
JAM Systems Q10 :: 4 x 2500W amplifier
Class D Power Amplifiers : Max Power: 4 x 1100W into 8 ohm, 4 x 2200W into 4 ohm, 4 x 2500W into 2 ohms
 
Product Code: JMSQ10 | Brand:
JAM Systems Q10 :: 4 x  2500W amplifier

JAM Systems Q10 :: 4 x  2500W amplifier JAM Systems Q10 :: 4 x  2500W amplifier JAM Systems Q10 :: 4 x  2500W amplifier 
HOT DEAL:
£725.00
was £775.00
Login to see JAM Club pricing
Not a member? Join Now
£8.22 DELIVERY to mainland UK.
JAM Systems Q10 :: 4 x 2500W amplifier

A high-performance range of professional use switch-mode power amplifiers, delivering outstanding premium power from a compact package. Its elegant 1U-footprint reduces rack space and cost, and weighing in at a shade over 10kg, set-up and breakdown of your stage is quicker and easier. Thoughtfully-designed recessed stepped attenuators make for easy and precise matching of gain structures, and a completely modular channel architecture means that each of the four channels has its own dedicated power supply for ultimate stability, with zero crosstalk or interference between channels. Employing a classic pulse-width modulation design, high switch-mode frequency and precise controlling of deadtime makes for exceptionally low distortion, surpassing the quality of traditional transformer-based amplifier designs. The high efficiency power supply is kind to the environment and ensures weight is kept to a minimum, with a circuit tailored for reliability that helps make sure your amplifier will continue to provide you with driving power time after time.

All 4 channels are identical, and each channel has a separate switched mode PSU, the power output per channel is the same regardless of whether one channel is driven or all 4 channels are driven:

2500W into 2 ohms - * EIAJ burst | 1300W into 2 ohms - ** 100Hz continuous
2350W into 4 ohms - *** 1kHz continuous | 2200W into 4 ohms @ 100Hz
1250W into 8 ohms - *** 1kHz continuous

* EIAJ 8:32 burst power measured at 1khz, 1% THD. This represents the maximum power available for signals with a high crest factor, and is approximately equivalent to speaker's published program power. ** 2 ohm power measured with 100Hz sine wave for a 10 second burst. Current limiting reduces the continuous output at 2 ohms to approximately 1300W. This is an indicator of maximum continuous power in bass applications *** 1kHz sine wave tested for 10 second burst with 1% THD

EIAJ ratings are short term burst ratings, but are representative of mid/high signals with a typical crest factor for common music. We have tested these amplifiers at 100Hz into 2 ohms and 4 ohms for purposes of assessing bass response. Continuous signals into low impedances trigger current limiting in the amplifier (self protection) which reduces the usable output power. Exceeding clip for over 2 seconds causes the amp to automate to self-protect. Higher crest factor signals are usually limited more by voltage rather than current, which allows significantly higher burst powers into 2 ohms compared with the continuous 100Hz rating.

Specifications:

  • Number of channels: 4
  • Frequency response (@8 ohms): 20Hz - 20kHz, +/-0.3dB
  • Slew rate: 50V/us
  • THD+N: <0.3%
  • IMD-SMPTE: <0.3%
  • SNR: >105dB
  • Crosstalk: >75dB
  • Damping Factor: >800 (8 ohms, 20Hz-200Hz)
  • Sensitivity: 1V
  • Input Impedance: 20k ohms (Balanced), 10k ohms (unbalanced)
  • Voltage Gain: 40dB
  • Protection: Auto mute for 2 seconds if clip level exceeded.
  • Efficiency: >85%
  • Cooling: Forced air flow from front to rear
  • Height: 1U
  • Product Dimensions: 483 x 375 x 44 (WxHxD)
  • Packaged Dimensions: 530 x 530 x 90 (WxHxD)
  • Net Weight: 10.5kg
  • Gross Weight: 12.2kg
Other JAM Systems products similar to JAM Systems Q10 :: 4 x 2500W amplifier:
JAM Systems K16 :: 4 x 3500W amplifier

£1250.00 inc VAT
(£1041.67 ex VAT)

JAM Systems i8 :: 8 x 600W install amplifier

£799.00 inc VAT
(£665.83 ex VAT)

JAM Systems K12 :: 4 x 2900W amplifier

£1100.00 inc VAT
(£916.67 ex VAT)

JAM Systems Q7 :: 4 x 1600W amplifier

£675.00 inc VAT
(£562.50 ex VAT)

UK & ROI
Delivery Info for JAM Systems Q10 :: 4 x  2500W amplifier  to locations within the United Kingdom and Ireland
EUROPE
Delivery Info for JAM Systems Q10 :: 4 x  2500W amplifier  to locations in Europe