Tuff Cab Premium Black Speaker Grille Foam (12mm)
Speaker front foam, charcoal black.
Permits free passage of air, has virtually no effect on the passage of sound, whilst offering a degree of protection by minimising the passage of dirt and dust towards the speakers, also offers some defence against liquid spillage, as the majority of the liquid is directed down the foam.
Sheet Size: 200 x 100 cm
Thickness: 12 mm
Foam covering designed to provide a nice finish for a speaker front. Works best when supported by a metal grill to give a tidy, flat, finish.
Hints & Tips:
Cut the foam a fraction smaller than the area you want to cover. Apply velcro (hooks) along the edges of the area to cover. Starting from one corner, gently stretch the foam to cover the whole area, and press down above the velcro hooks. We use 1 inch velcro, but find 3/4 inch usually works just as well. By stretching the foam across the surface, a nice even flat finish is obtained. We find 12mm is the most common thickness used, as it's thick enough to obscure whats behind it, whereas 5mm foam does permit some visibility of grilles/speaker drivers.
If you cut oversize, the foam will tend to bulge out and not sit flat. Getting the right size cut is critical in getting a perfect finish, and may take a little practise.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
|Other Tuff Cab products similar to Tuff Cab Premium Black Speaker Grille Foam (12mm):||