|
This product is not for sale Archived information provided for reference only | ||
JBL 2226H 15" 600W 8 Ohm
The 2226H low frequency transducer represents the industry leading results of JBL's engineering
research in high power transducer design. The 2226H signified a major advance in speaker design by incorporating JBL's patented Vented
Gap Cooling technology in an improved Symmetrical Field Geometry (SFG) magnetic structure.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature – a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry)magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduce distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
Specifications:
Nominal Diameter: 380 mm (15 in)
Rated Impedance: 8 ohms
Power Capacity: 600 W AES continuous pink noise
Sensitivity: 97 dB SPL, 1 W, 1 m (3.3 ft)
Frequency Range: 30 Hz - 2.5 kHz
Power Compression at –10 dB power (60 W): 0.7 dB
Power Compression at –3 dB power (300 W): 2.5 dB
Power Compression at rated power (600 W): 4.0 dB
Distortion: 2nd harmonic: ≤ 1.0%
Distortion: 3rd harmonic: ≤ 1.0%
Highest Recommended Crossover: 1200 Hz
Recommended Enclosure Volume: 85-285 l (3-10 ft3)
Effective Piston Diameter: 335 mm (13.2 in)
Maximum Excursion Before Damage (p-p): 40 mm (1.6 in)
Minimum Impedance: 6.0 ohms ± 10% @ 25°C (J)
Voice Coil Diameter: 100 mm (4 in)
Voice Coil Material: Edgewound aluminum ribbon
Voice Coil Winding Depth: 19.05 mm (0.75 in)
Magnetic Gap Depth: 8.1 mm (0.32 in)
Magnetic Assembly Weight: 6.8 kg (15 lb)
Bl Factor: 19.2 N/A
Effective Moving Mass: 0.098 kg
Positive voltage on BLACK terminal gives forward diaphragm motion.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature – a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry)magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduce distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
Specifications:
fs: 40 Hz
Re: 5.0 ohms (H)
10.0 ohms (J)
Qts: 0.31
Qms: 5.0
Qes: 0.33
Vas: 175 l (6.2 ft3)
Sd: 0.088 m2 (137 in2)
Xmax: 7.6 mm (0.30 in)
Vd: 689 cm3 (41 in3)
Le: 1.75 mH (H)
3.5 mH (J)
Ref Efficiency: 3.3%
Pe (Max)1: 600 W continuous pink noise
Overall Diameter: 388 mm (15¹⁷⁄₆₄ in)
Bolt Circle Diameter: 370 mm (14⁹⁄₁₆ in)
Cutout Front Mount: 355 mm (14 in)
Cutout Rear Mount: 359 mm (14⁹⁄₆₄ in)
Depth: 137 mm (5½ in)
Volume Displaced by Driver: 6 l (0.2 ft3)
Net Weight: 8.7 kg (19¼ lb)
Shipping Weight: 10.2 kg (22½ lb)
Re: 5.0 ohms (H)
10.0 ohms (J)
Qts: 0.31
Qms: 5.0
Qes: 0.33
Vas: 175 l (6.2 ft3)
Sd: 0.088 m2 (137 in2)
Xmax: 7.6 mm (0.30 in)
Vd: 689 cm3 (41 in3)
Le: 1.75 mH (H)
3.5 mH (J)
Ref Efficiency: 3.3%
Pe (Max)1: 600 W continuous pink noise
Overall Diameter: 388 mm (15¹⁷⁄₆₄ in)
Bolt Circle Diameter: 370 mm (14⁹⁄₁₆ in)
Cutout Front Mount: 355 mm (14 in)
Cutout Rear Mount: 359 mm (14⁹⁄₆₄ in)
Depth: 137 mm (5½ in)
Volume Displaced by Driver: 6 l (0.2 ft3)
Net Weight: 8.7 kg (19¼ lb)
Shipping Weight: 10.2 kg (22½ lb)
| Other products similar to JBL 2226H 15" 600W 8 Ohm: |
|
||
|
|