B&C DE75P 80W 8 Ohm 2" Bolt On Compression Driver (Faston) part for HK Audio DEACON Top 9940136
2" high frequency compression driver. The particular mylar/titanium diaphragm using a 3" edgewound flat aluminium wire voice coil and a optimized high energy ceramic magnet assembly produces smooth response and excellent sonic properties.
Specifications1
- Throat Diameter 50 mm (2 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 7.8 Ω
- Power Handling (800 –20000 Hz)
- Nominal2 80 W
- Continuous Program3 160 W
- Sensitivity (1W/1m)4 108 dB
- Frequency Range 0.5 – 18 kHz
- Recommended Crossover5 800 Hz
- Voice Coil Diameter 75 mm (3 in)
- Winding Material Aluminium
- Inductance 0.14 mH
- Diaphragm Material Titanium
- Flux Density 1.85 T
Mounting and Shipping Information
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter 170 mm (6.7 in)
- Depth 67 mm (2.6 in)
- Net Weight (1 unit) 4.5 kg (9.9 lb)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE75P 80W 8 Ohm 2" Bolt On Compression Driver (Faston): |
|
