Convair Electronics Crossover designed for use with the Flex 15 cabinet. We have tested the crossover with multiple HF devices, and this provides a good 'middle ground' solution suitable for use with various 1", 1.4" and 2" compression drivers in conjunction with the SC1064, SC1464 and SC2064 horn flares.

This crossover includes HF attenuation of around 10dB in the lower HF region (suitable for matching a typical 99dB sensitivity woofer with a compression driver with 109dB sensitivity). Also included is a bypass capacitor on the attenuation resistors, this capacitor bypasses the attenuation from around 6-8kHz, providing a lift on the output response to correct the HF drop off present on most standard compression drivers. Final results vary according to compression driver, as impedance in the lower HF region can vary from 6-30 ohms in many instances. You may need to reverse phase the HF device for the best results, we recommend trying both configurations (normal phase and reverse phase) to see which gives you the best results.

SPECIFICATION

• Type: Two Way Crossover with HF attenuation and EQ
• Nominal Frequency: 2.0KHz
• Slope: 12dB/octave
• Impedance: 8 ohms
• RMS Power: 750W
• Program Power: 1200W
• Dimensions:160mmx120mm

Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.