|
| |||||||||||||||||
B&C 6XT13 6.5" 120W 8 Ohm Loud Speaker
High efficency full range, ideal for voice reproduction in compact monitor
Specifications
- Nominal Diameter 170 mm (6.5 in.)
- Nominal Impedance 8 Ω
- Minumum Impedance 5.6 Ω
- Power Handling
- Nominal1 120 W
- Continuous Program2 240 W
- Sensitivity (1W/1m)3 96 dB
- Frequency Range 100-20000 Hz
- Voice Coil Diameter 38 mm (1.5 in.)
- Winding Material Aluminium
- Former Material Fiber Glass
- Winding Depth 8 mm (5/16 in.)
- Magnetic Gap Depth 6 mm (1/4 in.)
- Flux Density 1.25 T
Thiele & Small Parameters2
- Fs 98 Hz.
- Re 5.4 Ω
- Qes 0.7
- Qms 4.1
- Qts 0.6
- Vas 7 dm.3 (0.25 cu. ft.)
- Sd 132 cm.2 (20.5 sq. in.)
- η0 0.9 %
- X max ± 1 mm.
- Mms 10 gr.
- Bl 6.8 Tm
- Le 0.6 mH
Mounting and Shipping Informations
- Overall Diameter 187 mm. (7.4 in.)
- Bolt Circle Diameter 172 mm. (6.7 in.)
- Baffle Cutout Diameter 145 mm. (5.7 in.)
- Depth 78 mm. (3.1 in.)
- Flange and Gasket Thickness 11 mm. (7/16 in.)
- Net Weight (1 unit) 2.3 Kg. (5.1 lb.)
1 2 hours test made with continuous IEC 268 shaped pink noise signal (6 dB crest factor) . Power calculated on rated minimum impedance. Loudspeaker in free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 200 to 20000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
| Other B & C products similar to B&C 6XT13 6.5" 120W 8 Ohm Loud Speaker: |
|
||
|
|
B&C 6XT13 6.5" 120W 8 Ohm Loud Speaker PDF data sheet (598 kb)
View B & C website for more information for B & C 6XT13 SEARCH results for other drivers with similar T-S Parameters to B&C 6XT13 6.5" 120W 8 Ohm Loud Speaker