Convair Electronics High Pass Filter 5kHz 12dB
Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion losses are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.
SPECIFICATION
-
Type: High-Pass
-
Frequency: 5kHz
-
Slope: 12dB/octave
-
Impedance: 8 ohms
-
RMS Power: 500W (THD typically less than 0.5%)
-
Program Power: 1000W (THD typically less than 1%)
-
Dimensions: 104 x 53 x 38mm high
-
Insertion loss less than 0.1dB, Crossover point within +/-10% of stated value, tolerance typically less than 5%
A passive high pass filter is used to protect a high frequency device (compression driver or tweeter) from damage due to frequencies below its safe working range. Selecting the best crossover frequency also allows fine tuning for the best overall sound.
We are able to build to order most common values between 0.1mH and 7mH, subject to limitations of bobbin size and wire diameter. Please email the sales office.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
Other Convair Electronics products similar to Convair Electronics High Pass Filter 5kHz 12dB: |
|