 |
| |||||
|
| ||||||||||||
Oberton 12B400 - 12" 450W 8 Ohm
The 12B400 loudspeaker is combining good linearity and efficiency with high power handling capabilities, with use of 77 mm aluminium voice coil. It features vented aluminium die cast frame, 180 mm magnet structure and curvilinear paper cone. 12B400 is suitable for application as LF driver in small stage monitor and 2- way PA boxes with 1" HF driver.
- 98db 1W / 1m average sensitivity
- 77mm high temperature aluminium voice coil
- 900W AES program power
- Powerful,ferrite180 mm magnet structure
- Silicone spider
Specifications:
- Nominal Diameter 12"/310 inch/mm
- Impedance 8 Ohm
- Minimum Impedance 6.35 Ohm
- Power Capacity AES ¹ 450 W
- Program Power ² 900 W
- Sensitivity (200-2000 Hz) 98 dB/W/m
- Frequency Range 50 - 2500 Hz
- Voice Coil Diameter 77 mm
- Voice Coil Material Aluminium
- Voice Coil Former Kapton™
- Voice Coil Winding Depth 15 mm
- Magnet Gap Depth 9 mm
- Cone Material Paper
- Basket Die cast aluminium
- Magnet Ferrite
- Flux Density 1.33 T
Thiele-Small Parameters:
- Resonance Frequency 50.47 Hz
- Mechanical Efficiency Factor (Qms) 9.69
- Electrical Efficiency Factor (Qes) 0.256
- Total Q (Qts) 0.249
- Equivalent Air Volume (Vas ) 74.74 Litres
- Diaphragm mass ind. airload (Mms) 49.22 grams
- Voice Coil Resistance Re 5.55 Ohms
- Effective Diagram Area (Sd) 514.7 cm2
- Peak Linear Displacement of Diaphragm (Xmax)*5.25 mm
- Mechanical Compliance of Suspension (Cms) 0.202 mm/N
- BL Product (BL) 18.40 T.m
- V.C. Inductance at 1 kHz (Le) 0.81 mH
Mounting Information:
- Overall Diameter 310 mm
- Baffle Hole Diameter 280 mm
- Number of Mounting Holes 8 with dia. 7 mm
- Bolt Circle Diameter 294 mm
- Overall Depth 144.5 mm
- Net Weight 7.25 kg
| Other Oberton products similar to Oberton 12B400 - 12" 450W 8 Ohm: |
|
||
|
|
View Oberton website for more information for Oberton 12B400Our database has the following results for compatibility of this product with common speakers and components.
Electrovoice SX300 | Woofer | Equivalent
Electrovoice SX300 | Woofer | Equivalent
Our database of parts includes a wide range of products, and in many cases offers cost effective alternatives for repair. Alternatives are loosely grouped into three types:
Original - Usually an exact match to the original product, and just the 'standard' part from the factory which gets rebadged by manufacturer with their own brand and part number. Occasionally, there are subtle tweaks made from the standard part, but its virtually impossible for us to determine this. If we have listed the part as Original, it means we are confident the performance is the same.Aftermarket - Aftermarket parts often become available from factories in the far east once the original part is no longer manufactured. They are intended to be a close match, and provide a cost-effective alternative.
Equivalent - These are alternative options, which provide very similar performance, but are not the same as the original. In some cases the performance may actually be improved. We have used both our own experience, and feedback from customers in generating list of alternatives. Alternatives like this are useful when the original part is no longer made, there is no aftermarket option, so the only choice is to upgrade with the nearest current equivalent product.