 |
| |||||
| ||||||||||||||
1.4" high frequency compression driver. The particular mylar/titanium diaphragm using a 3" edgewound flat aluminium wire voice coil and a optimized high energy ceramic magnet assembly using a copper shorting ring assembly produce smooth response and excellent sonic properties.
- 160 W continuous program power capacity
- 1.4" horn throat diameter
- 75 mm (3 in) aluminium voice coil
- Titanium diaphragm
- 500 - 18000 Hz response
- 108 dB sensitivity
- Shorting copper cap for extended HF response
This product appears to be unavailable. Please contact us if you require this product, and we will make further enquiries or look for an equivalent model..
Specifications:
- Throat Diameter 36 mm (1.4 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 8 Ω
- Power Handling (1000 –20000 Hz)
- Nominal2 80 W
- Continuous Program3 160 W
- Sensitivity (1W/1m)4 107 dB
- Frequency Range 0.5 – 18 kHz
- Recommended Crossover5 1000 Hz
- Voice Coil Diameter 75 mm (3 in)
- Winding Material Aluminium
- Inductance 0.14 mH
- Diaphragm Material Titanium
- Flux Density 1.8 T
Mounting and Shipping Information:
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter 170 mm (6.7 in)
- Depth 67 mm (2.6 in)
- Net Weight (1 unit) 4.5 kg (9.9 lb)
1 Driver mounted on B&C ME 90 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE82 8 Ohm 1.4" Bolt On Compression Driver : |
|
If you find 'B&C DE82 <span class="ohm_8">8 Ohm</span> 1.4" Bolt On Compression Driver ' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.