Convair Electronics High Pass Filter 1.8kHz

Convair Electronics High Pass Filter 1.8kHz

Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion losses are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.

Specifications

• Type: High-Pass Filter
• Frequency: 1.8kHz
• Slope: 18dB/octave 3rd order Butterworth
• Impedance: 8 ohms
• RMS Power: 250W
• Program Power: 500W
• Dimensions: 126 x 75 x 38mm high
• Insertion loss less than 0.1dB, Crossover point within +/-10% of stated value, tolerance typically less than 5%

A passive high pass filter is used to protect a high frequency device (compression driver or tweeter) from damage due to frequencies below its safe working range. Selecting the best crossover frequency also allows fine tuning for the best overall sound.

Seen this cheaper?
If you find 'Convair Electronics High Pass Filter 1.8kHz' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.